Author Topic: Kyocera KM4035 Error Code C6050 problem solution help  (Read 4359 times)

bobysM

  • Global Moderator
  • Newbie
  • *****
  • Posts: 47
  • Karma: +0/-0
    • View Profile
Kyocera KM4035 Error Code C6050 problem solution help
« on: May 29, 2011, 08:40:56 AM »
I'm getting Kyocera KM4035 error code C6050  "System Error Call Service ".

 All the lights (copier, scanner, printer,)are on. When I turn it off and  back on, the finisher portion makes a  noise....
Please help if you can.
 :o

jkhes

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Kyocera KM4035 Error Code C6050 problem solution help
« Reply #1 on: February 14, 2013, 11:50:03 PM »
Low fixing temperature error.
C6050 Reset procedure

kyocera machines have a self diagnostic function to displays an error code whenever a problem occurs. Low level error codes can be reset by restarting the machine but higher risk level codes (C6000, C6020, C6030, C6050, C6100, C6200, C6300 etc) need to be reset by pressing some keys in a particular sequence. Before we go into the detail of reset procedure, let have a look at the root cause of these errors.


Causes:
1. Unstable power source
2. Low/High voltage
3. Broken thermistor wire
4. Poor contact in the thermistor connector terminals.
5. Heater lamps are broken or not installed correctly.

Before resetting "6XXX" series code, make sure that defective parts have been replaced/repaired.
Reset Procedure:
Enter 1087-1087 (1087 twice) from the keypad.
Enter 163 by using keypad.
Press "Start" (the green button) twice.
The machine will restart automatically.
« Last Edit: February 16, 2013, 07:59:13 PM by HenryS »

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20