Author Topic: Error Code H4-00 Sharp MX-2300N, MX-2700N, MX-3500N, MX-3501N, 4500N, MX-4501N  (Read 6818 times)

fendia

  • Hero Member
  • *****
  • Posts: 630
  • Karma: +0/-0
    • View Profile
Error Code H4-00 on Sharp MX-2300N,  MX-2700N, MX-3500N, MX-3501N, 4500N, MX-4501N copiers problem solution help.
:o

This is The temperature does not reach the specified level within the specified time after turning on the power relay. abnormal.
Upgrade the firmware.

;D

CopierLiquidationCenter.com

80% OFF on LOW METER copiers.
New Arrivals Daily!



FOR MODELS: Sharp MX-2300N, Sharp MX-2700N, Sharp MX-3500N, Sharp MX-3501N, Sharp MX-4500N, Sharp MX-4501N, Sharp MX-5500N, Sharp MX-6200N, Sharp MX-6201N, Sharp MX-7000N, Sharp MX-7001N
« Last Edit: June 15, 2013, 08:11:36 AM by mz7060 »

HenryS

  • Copier University Senior Tech
  • Administrator
  • Sr. Member
  • *****
  • Posts: 355
  • Karma: +3/-1
  • Senior Copier Tach ... zoomm
    • View Profile
    • CopierLiquidationCenter.com
Clear the display of self-diagnostics with
SIMULATION 14.

Go to the simulation mode:

1) #/P key (program) ON → Asterisk (*) key ON → CLEAR key ON →
Asterisk (*) key ON → You are ready for input of a main code of simulation 14

 :D
« Last Edit: June 22, 2011, 12:17:56 AM by HenryS »
Copiers R Us

HenryS

  • Copier University Senior Tech
  • Administrator
  • Sr. Member
  • *****
  • Posts: 355
  • Karma: +3/-1
  • Senior Copier Tach ... zoomm
    • View Profile
    • CopierLiquidationCenter.com
The H4-00 code: Fuser  have blown the thermistor.
Sometimes its a false error code.
Try this  to clear it first.
 To reset try the following :

    Hit this sequence: CLR-Exposure-CLR-Exposure
    The display will go blank.

   press "14", press PRNT

    Hit "CLR" several times to exit.
Copiers R Us

HenryS

  • Copier University Senior Tech
  • Administrator
  • Sr. Member
  • *****
  • Posts: 355
  • Karma: +3/-1
  • Senior Copier Tach ... zoomm
    • View Profile
    • CopierLiquidationCenter.com
Sharp Error Code H4-00

Try this:
Press: # * C *. that will enter the machine into the simulation mode.

Then enter the number 14, and follow what it says on the screen.

Then enter 1 and  execute.

Good luck
 :) :) :)
« Last Edit: June 22, 2011, 12:28:09 AM by HenryS »
Copiers R Us

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20