Error Code SC 142
on Gestetner copiers looking for solutions and problems
This is The White Level (glass)
adjustment problem during auto gain control. Possible Causes Dirty exposure glass
or optics section.
SBU board is no good.
IPU board is no good.
Exposure lamp is no good.
Lamp stabilizer is no good.
Turn on the main switch
off and on.
Check if the exposure lamp is lit during initialization.
Check the wires between IPU and SBU.
Fix the exposure lamp.
Clean the exposure glass, white plate, mirrors, and lens.
Fix the SBU board.
Fix the IPU board
CopierLiquidationCenter.com 80% OFF
on LOW METER copiers.New Arrivals Daily!
Error Code SC 101 IN MODELS: Gestetner DSM735E, DSM745E, Lanier LD050B,LD050SP, Lanier LD140G, Lanier LD140SP, Lanier LD150SP, LD335, Lanier LD345, Ricoh AFICIO MP3500, Ricoh AFICIO MP3500SP, MP3500SPF, Ricoh AFICIO MP3500SPI, Ricoh AFICIO MP4000, MP4000SP, ricoh AFICIO MP4001G, Ricoh MP4001SP, MP4500, Ricoh AFICIO MP4500P, MP4500SP, Ricoh AFICIO MP4500SPI, Ricoh AFICIO MP5000, Ricoh AFICIO MP5000SP, Ricoh AFICIO MP5001G, Savin 8035E, 8045E, 9040B, 9050,