No Products in the Cart
Quick answer: If your Ricoh copier sends scans through a Microsoft 365 mailbox with a saved username and password, that sign-in method is being switched off. Under Microsoft's current timeline it is turned off by default for existing Microsoft 365 organizations at the end of December 2026. Ricoh has released firmware that signs in with OAuth 2.0 instead, and it covers most MP and IM models, including the ones we sell. Scan to folder is not affected.
For years, copiers have sent scan-to-email through Microsoft 365 using a stored email address and password. Microsoft calls this Basic authentication for SMTP AUTH, and it is retiring it for security reasons. The original cutoff was set for spring 2026. In January 2026 Microsoft published a revised timeline: Basic authentication is turned off by default for existing organizations at the end of December 2026, and a final removal date will be announced in the second half of 2027.
If your office uses Microsoft 365 email and your copier was set up more than a year or two ago, assume it is affected until you have checked.
Ricoh's answer is a firmware update that adds a new sign-in option. After the update, Web Image Monitor shows OAuth2.0 (for Exchange Online) as an email send authentication method. A Microsoft 365 administrator approves the copier once, and scanning carries on without a stored password.
Ricoh publishes the full list of supported models and firmware versions. As of its January 30, 2026 update, the list includes these families:
| Series | Models on Ricoh's supported list |
|---|---|
| IM C color, current | IM C2010, C2510, C3010, C3510, C4510, C5510, C6010 |
| IM C color | IM C2000, C2500, C3000, C3500, C4500, C5500, C6000, IM C300, C400F |
| MP C color | MP C3004, C3504, C4504, C6004 and their ex editions, MP C307, C407 |
| IM black and white | IM 2500, 3000, 3500, 4000, 5000, 6000, 7000, 8000, 9000, IM 350, IM 430, IM 550F |
| MP black and white | MP 2555, 3055, 3555, 4055, 5055, 6055, MP 402SPF |
That covers nearly every machine in our used Ricoh copier lineup. An older MP-series machine is not left behind on this one, as long as its firmware is brought up to date. Always check Ricoh's list for your exact model and the firmware version it needs.
Microsoft is also tightening the encryption standards (TLS cipher suites) that Microsoft 365 accepts. Ricoh has warned that some products, including some that already support OAuth 2.0, need updated firmware for this as well. It is covered in a separate Ricoh notice. In practice the answer is the same: get the machine onto current firmware. If the Ricoh update tool fails with a TLS error, see our guide to the Ricoh Firmware Update Tool TLS error.
Steps 3 and 4 need someone with administrator access to your Microsoft 365 account. The copier cannot be approved without it.
Only if it sends through Microsoft 365 with a saved username and password. Scan to folder, USB scanning, and scanning through other email services are not part of this change.
Most do. Ricoh's supported list includes the MP C3004 through C6004 family, the MP 3555 through 6055 family, and the IM and IM C series. The machine needs the firmware version Ricoh specifies.
No. This is a Microsoft 365 change. Google has its own sign-in rules for devices, which are separate.
Yes, for the Microsoft 365 approval step. Someone with administrator access to the account has to authorize the copier.
Usually a failed-transmission message on the copier and no email arriving. The copier's scanner journal or transmission log will show an authentication failure.
Tell us which email system your office uses before you buy and we will tell you where your model stands. For the rest of the setup, see Setting Up a Used Copier in a New Office and Can You Upgrade a Used Copier?. Call or text 714-696-6082 or request a quote.